2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch

2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch info

2 x 2032 Coin Cell Battery Holder with On/Off Switch is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 are the most popular size) in series to generate 6V nominal. (If you want only 3V, we suggest sticking a crumpled piece of tin foil in one of the slots.) 20mm coin cells are popular as they are used in keychain lights, so they are easy to get, and fairly low cost. They tend to have about 220mAh capacity so this holder would give you 6V @ 220mAh with two cells.

2 x 2032 Coin Cell Battery Holder with On/Off Switch is made of plastic and snaps open and closed. You can tape it closed if you need more security than just the plastic snap. A nice extra is the on/off switch up top. The holder has a 2mm JST PH connector on the end but you can cut it off if you want to solder on a different connector.

Note: The pack does NOT include any 2032 coin cells.

2 x 2032 Coin Cell Battery Holder with On/Off Switch - General Specifications

• 2032 coin cell battery holder from Adafruit
• Supplies 6V@220mA
• On/off switch
• 2mm JST PH connector

2 x 2032 Coin Cell Battery Holder with On/Off Switch - Technical Specifications

• Empty Weight: 4.7g
• Loaded Weight: 10.5g
• Size: 53mm x 23mm x 6mm
• Wire Length: 6" / 150mm

Videos

Documents

Adafruit Learn Link: https://learn.adafruit.com/battery-powering-wearable-electronics

References

Adafruit Web Site:

https://www.adafruit.com/products/783